3/1/2024 0 Comments Camerabag pro trial installMeaning I had to spin my focus ring about half an inch at a time. Setting my focus took a little more effort as the holes don’t allow a wide range of movement. With the holes in the side of the lens tube I was able to switch over to manual focus without much problem. The camera was already in the bag when I realized my best bet was to use manual focus and simply set it to a given depth, rather than miss shot after shot in the fast breaking surf. With no pretty coral out front our hotel, I took some inspiration from Clark Little and decided to shoot through wave tubes toward the setting sun. I suggest new owners do the same to ensure their unit is not faulty.Īfter a few very boring photos of the drain in my bathtub, and a flight to the Caribbean Island of Barbados, it was time for a real world test of the case. I then dunked the unit in my bathtub to make sure no water got inside. ![]() In useĪs an operational note, I practiced zipping up the bag with only paper towels inside a few times. There is also an additional neck strap that can be clipped into the buckles, but I usually didn’t use it. Lastly, you attach one last, larger velcro strip, to hold everything closed. Next, you need to roll down the zip a few times and then attache the first velcro strip to hold it in place. This isn’t a sandwich in a bag so this too took a few practice tries to get most of the air out. Now, like any Ziploc, I had to squeeze out the excess air and then clamp shut the top zip. It was a little tricky finding the beginning thread but easier after a couple of practices. I then checked the front optics of my lens for smudges or dirt before screwing on the lens port. For me, it wasn’t required, but it was easier. A smaller camera, like the Digital Rebel lineup of cameras, would probably fit easily without removing the lens. I was then able to take off the front port and insert my Canon EF 10-22mm lens, attaching it to the body inside the bag. This made it easy to slide in the top with the zip open. I was using a Canon 7D without the standard battery grip. ![]() How it worksįollowing trial and error and then searching the Internet, I found it easiest to insert my camera with the lens off. Inside, the bag is fairly sparse but it does come with a one inch thick foam pad to place beneath your camera. There is a double industrial plastic clamping zip along the top and then strips of Velcro to hold things in place. The top of the bag is where the sealing happens. It is also conceivable to activate side-of-lens controls, such as VR/IS or manual focus modes. The tube also has two of the finger holes to allow for adjustment of zoom (typically on zooms that use a dial, rather than push/pull type) and focus. Extending out the front of the bag is the lens tube with a special screw on port for the end. With a clear plastic back, LCDs are easy to view and there is a softer rubberized plastic opening for a shutter release finger. But unlike your average sandwich bag, the plastic on the Dicapac is heavy duty PVC/TPU and the seams are all welded tight on the inside. The lay of the bagįor lack of a better term, the Dicapac is a heavy duty Ziploc bag with a special port for your lens. They have a few models for different sized cameras and mine is the WP-S10 model, suitable for normal size DSLRs (they have smaller size bags for point and shoot as well as mirrorless cameras). The housing I chose is from a company you probably have never heard of – Dicapac USA. That’s when I dropped $60 on a housing and prayed it would not kill my Canon 7D. ![]() But curiosity got the better of me before a trip last year to Barbados when I wanted to take photos of turtles underwater, but lacked funds for a $3000 underwater housing for my DSLR. In an industry known for getting what you pay for, I am always skeptical of cheap, new solutions where only expensive ones existed previously.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |